Specification:
Color | Black/Coffee |
Light source | 1*white light X-LED |
Material | Aviation aluminum, anodized surface |
Switch type | Tactical tail switch (rated for 50,000 presses) |
Luminous flux | 686 lumen |
Light intensity | 89,600 candela |
Beam distance | 653 yards |
Run Time | 45 mins |
Reflective system | Aluminum alloy reflector |
Battery | 1*18350 Li-ion rechargeable battery (included) |
Waterproof | IP67 |
Size(±0.5mm) | (head diameter)32.5mm, (length)118mm |
Weight(±0.5g) | 130g |
Features:
1. Light-weight throwing rail tactical flashlight. The white light beam can reach 653 yards and the light intensity is as high as 89,600 candela!
2. Double-sided anti-reflection coating tempered glass lens
3. High efficiency constant current drive circuit, no noise and PWM.
4. With battery reverse polarity protection and battery over-discharge protection, low-voltage warning function.
5. IP67 protection standard, waterproof and dustproof, shock and vibration resistance.
6. Tactical tail switch, rated for 50,000 presses, can be lightly pressed to light up silently, or it can be locked to be always on.
7. W35A tactical lights can be installed on Weltool PM4, M-LOK or Picatinny ,KeyMod , MIL-STD-1913, STANAG 2324, STANAG 4694 and other types of tactical rails. Suitable for most AR rifles and short-barreled rifles or carbines.
Pancake included:
1 x WELTOOL W35A Helmet Flashlight
1 x 18350 Li-ion Rechargeable Battery
Note:
1. After the glass lens of the light head is damaged, you can replace the spare lens by yourself, take out the battery, and press the light head down on rough and soft leather or fabric, such as mouse pads, anti-skid pads, and twist the light body counterclockwise. Unscrew the bezel and take out the damaged lens and replace it with a new one, and then tighten the bezel clockwise. In addition to this situation, please do not disassemble other parts, otherwise the warranty will be invalidated and the product may be damaged.
2. When this tactical light is on, the internal heat will be discharged in time, so it is normal to generate heat during use;
3. Please check and replace the O-ring regularly to maintain the waterproof rating.
4. Please check and lubricate the threads regularly with professional lubricant.
5. Clean the contact surfaces regularly to keep the flashlight normal operation. If irregular strobe or failure to turn-on occurs, the contact surfaces may be dirty and requires cleaning by using alcohol cotton swabs.
6. This flashlight is not intended to be used as a diving light.
7. Do not aim the flashlight directly at eyes. Keep out of the reach of children.
